Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command clears buffered logging (system startup and system operation logs).

This command clears all event messages that are stored on the switch.

This command enables email alerting and sets the lowest severity level for which log 
messages are emailed. If you specify a severity level, log messages at or above this severity 
level, but below the urgent severity level, are emailed in a non-urgent manner by collecting 
them together until the log time expires. You can specify the severitylevel value as 
either an integer from 0 to 7 or symbolically through one of the following keywords: 
emergency

 (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), 

or debug (7).

Number of Traps Since Last Reset

The number of traps since the last boot.

Trap Log Capacity

The number of traps the system can retain.

Number of Traps Since Log Last Viewed The number of new traps since the command was last executed.

Log

The log number.

System Time Up

How long the system had been running at the time the trap was sent.

Trap

The text of the trap message.

Format

clear logging buffered

Mode

Privileged EXEC

Format

clear eventlog

Mode

Privileged EXEC

Default

disabled; when enabled, log messages at or above severity Warning (4) are emailed

Format

logging email [severitylevel]

Mode

Global Config