Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Utility Commands
235
M5300, M6100, and M7100 Series ProSAFE Managed Switches
file verify
This command enables digital signature verification while an image and/or configuration file
is downloaded to the switch.
is downloaded to the switch.
Note:
This command is supported on M6100 series switches only.
no file verify
Resets the configured digital signature verification value to the factory default value.
write memory
Use this command to save running configuration changes to NVRAM so that the changes
you make will persist across a reboot. This command is the same as copy
system:running-config nvram:startup-config
you make will persist across a reboot. This command is the same as copy
system:running-config nvram:startup-config
. Use the confirm
keyword to
directly save the configuration to NVRAM without prompting for a confirmation.
Simple Network Time Protocol Commands
This section describes the commands you use to automatically configure the system time
and date by using Simple Network Time Protocol (SNTP).
and date by using Simple Network Time Protocol (SNTP).
Format
file verify {all | image | none | script}
Mode
Global Config
Parameter
Description
All
Verifies the digital signature of both image and configuration files.
Image
Verifies the digital signature of image files only.
None
Disables digital signature verification for both images and configuration files.
Script
Verifies the digital signature of configuration files.
Format
no file verify
Mode
Global Config
Format
write memory [confirm]
Mode
Privileged EXEC