Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Utility Commands
241
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show sntp source-interface
Use this command to display the SNTP client source interface configured on the switch.
Command example:
(NETGEAR Switch) #show sntp source-interface
SNTP Client Source Interface................... (not configured)
Time Zone Commands
Use the Time Zone commands to configure system time and date, Time Zone and Summer
Time (that is, Daylight Saving Time). Summer time can be recurring or non-recurring.
Time (that is, Daylight Saving Time). Summer time can be recurring or non-recurring.
clock set
This command sets the system time and date.
Command example:
(NETGEAR Switch) (Config)# clock set 03:17:00
(NETGEAR Switch) (Config)# clock set 11/01/2011
Format
show sntp source-interface
Mode
Privileged EXEC
Field
Description
SNTP Client Source Interface The interface ID of the physical or logical interface configured as the SNTP client source
interface.
SNTP Client Source IPv4
Address
The IP address of the interface configured as the SNTP client source interface.
Format
clock set hh:mm:ss
clock set mm/dd/yyyy
Mode
Global Config
Parameter
Description
hh:mm:ss
Enter the current system time in 24-hour format in hours, minutes, and seconds. The range is hours:
0 to 23, minutes: 0 to 59, seconds: 0 to 59.
0 to 23, minutes: 0 to 59, seconds: 0 to 59.
mm/dd/yyyy
Enter the current system date the format month, day, year. The range for month is 1 to 12. The range
for the day of the month is 1 to 31. The range for year is 2010 to 2079.
for the day of the month is 1 to 31. The range for year is 2010 to 2079.