Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Utility Commands
258
M5300, M6100, and M7100 Series ProSAFE Managed Switches
DNS Client Commands
These commands are used in the Domain Name System (DNS), an Internet directory
service. DNS is how domain names are translated into IP addresses. When enabled, the
DNS client provides a hostname lookup service to other components of NETGEAR Managed
Switch.
service. DNS is how domain names are translated into IP addresses. When enabled, the
DNS client provides a hostname lookup service to other components of NETGEAR Managed
Switch.
ip domain lookup
Use this command to enable the DNS client.
no ip domain lookup
Use this command to disable the DNS client.
ip domain name
Use this command to define a default domain name that NETGEAR Managed Switch
software uses to complete unqualified host names (names with a domain name).
software uses to complete unqualified host names (names with a domain name).
By default,
no default domain name is configured in the system. name cannot be longer than
255 characters and cannot include an initial period. name should be used only when the
default domain name list, configured using the ip domain list command, is empty.
255 characters and cannot include an initial period. name should be used only when the
default domain name list, configured using the ip domain list command, is empty.
The CLI command ip domain name yahoo.com configures yahoo.com as a default
domain name. For an unqualified hostname xxx, a DNS query is made to find the IP address
corresponding to xxx.yahoo.com.
domain name. For an unqualified hostname xxx, a DNS query is made to find the IP address
corresponding to xxx.yahoo.com.
Default
enabled
Format
ip domain lookup
Mode
Global Config
Format
no ip domain lookup
Mode
Global Config
Default
none
Format
ip domain name name
Mode
Global Config