Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Utility Commands
264
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show ip address-conflict
This command displays the status information corresponding to the last detected address
conflict.
conflict.
clear ip address-conflict-detect
This command clears the detected address conflict status information.
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions
affecting their NETGEAR Managed Switch product.
affecting their NETGEAR Managed Switch product.
CAUTION:
The output of debug commands can be long and may adversely affect
system performance.
system performance.
capture start
Use the capture start command to manually start capturing CPU packets for packet
trace.
trace.
The packet capture operates in three modes:
•
capture file
•
remote capture
•
capture line
Format
show ip address-conflict
Modes
Privileged EXEC
Term
Definition
Address Conflict Detection Status
Identifies whether the switch has detected an address conflict on any IP address.
Last Conflicting IP Address
The IP Address that was last detected as conflicting on any interface.
Last Conflicting MAC Address
The MAC Address of the conflicting host that was last detected on any interface.
Time Since Conflict Detected
The time in days, hours, minutes and seconds since the last address conflict was
detected.
detected.
Format
clear ip address-conflict-detect
Modes
Privileged EXEC