Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command shows backplane port diagnostics for each port and is only intended for Field 

Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this 

command and capture this information.

This command displays the route a packet will take to reach the destination. 

 This command displays the backplane model ID, FAPGA version, and serial number.

Chassis Firmware Synchronization (CFS) provides the ability to automatically synchronize 
firmware for all chassis members. If a blade joins the chassis and its firmware version is 
different from the version running on the chassis manager, the CFS feature can either 
upgrade or downgrade the firmware on the mismatched chassis member. There is no attempt 
to synchronize the blade to the latest firmware in the chassis.

Tx Total Errors

Platform-specific number of total transmit errors since power-up.

Rx Data Rate

Receive data rate in megabits per second on the backplane port.

Rx Error Rate

Platform-specific number of receive errors per second.

Rx Total Errors

Platform-specific number of total receive errors since power-up.

Link Flaps

The number of times this backplane port transitioned to the down state.

Format

show backplane-port diag [<1-3> | all] [verbose]

Mode

Privileged EXEC

Format

show backplane-port packet-path {1-3 | all}

Mode

Privileged EXEC

Format

show backplane

Mode

Privileged EXEC