Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
395
M5300, M6100, and M7100 Series ProSAFE Managed Switches
1/0/7 Designated Forwarding 3000 128.7
1/0/8 Designated Forwarding 3000 128.8
0/1/1 Disabled Disabled 3000 128.1026
0/1/2 Disabled Disabled 3000 128.1027
0/1/3 Disabled Disabled 3000 128.1028
0/1/4 Disabled Disabled 3000 128.1029
0/1/5 Disabled Disabled 3000 128.1030
0/1/6 Disabled Disabled 3000 128.1031
VLAN Commands
This section describes the commands you use to configure VLAN settings.
vlan database
This command gives you access to the VLAN Config mode, which allows you to configure
VLAN characteristics.
VLAN characteristics.
network mgmt_vlan
This command configures the Management VLAN ID, which can be a VLAN number in the
range 1–4093.
range 1–4093.
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
vlan
This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN
identification number (ID 1 is reserved for the default VLAN). The VLAN number is in the
range 2–4093.
identification number (ID 1 is reserved for the default VLAN). The VLAN number is in the
range 2–4093.
Format
vlan database
Mode
Privileged EXEC
Default
1
Format
network mgmt_vlan number
Mode
Privileged EXEC
Format
no network mgmt_vlan
Mode
Privileged EXEC