Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
434
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show mac-address-table gmrp
This command displays the GMRP entries in the Multicast Forwarding Database (MFDB)
table.
table.
Port-Based Network Access Control Commands
This section describes the commands you use to configure port-based network access
control (IEEE 802.1X). Port-based network access control allows you to permit access to
network services only to and devices that are authorized and authenticated.
control (IEEE 802.1X). Port-based network access control allows you to permit access to
network services only to and devices that are authorized and authenticated.
aaa authentication dot1x default
Use this command to configure the authentication methods for port-based access to the
switch. The additional methods of authentication are used only if the previous method returns
an error, not if there is an authentication failure.
switch. The additional methods of authentication are used only if the previous method returns
an error, not if there is an authentication failure.
Leave Timer
The period of time to wait after receiving an unregister request for an attribute before deleting the
attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for
another station to assert registration for the same attribute in order to maintain uninterrupted service.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are
20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds).
attribute. Current attributes are a VLAN or multicast group. This may be considered a buffer time for
another station to assert registration for the same attribute in order to maintain uninterrupted service.
There is an instance of this timer on a per-Port, per-GARP participant basis. Permissible values are
20 to 600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds).
LeaveAll Timer
This Leave All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU
indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to
maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis.
The Leave All Period Timer is set to a random value in the range of LeaveAllTime to
1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory
default is 1000 centiseconds (10 seconds).
indicates that all registrations will shortly be deregistered. Participants will need to rejoin in order to
maintain registration. There is an instance of this timer on a per-Port, per-GARP participant basis.
The Leave All Period Timer is set to a random value in the range of LeaveAllTime to
1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60 seconds). The factory
default is 1000 centiseconds (10 seconds).
Port GMRP Mode
The GMRP administrative mode for the port. It may be enabled or disabled. If this parameter is
disabled, Join Time, Leave Time and Leave All Time have no effect.
disabled, Join Time, Leave Time and Leave All Time have no effect.
Format
show mac-address-table gmrp
Mode
Privileged EXEC
Term
Definition
VLAN ID
The VLAN in which the MAC Address is learned.
MAC Address
A unicast MAC address for which the switch has forwarding and or filtering information. The format is
6 two-digit hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB.
Type
The type of the entry. Static entries are those that are configured by the end user. Dynamic entries
are added to the table as a result of a learning process or protocol.
are added to the table as a result of a learning process or protocol.
Description
The text description of this multicast table entry.
Interfaces
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Term
Definition