Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
469
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show mrp
This command displays MRP leave, join, and leaveall intervals configured on interfaces. If
you specify the summary parameter, the output shows interval values for all interfaces. If you
specify the unit/slot/port parameter, the output shows the MRP intervals for the
specified interface.
you specify the summary parameter, the output shows interval values for all interfaces. If you
specify the unit/slot/port parameter, the output shows the MRP intervals for the
specified interface.
MMRP Commands
mmrp (Global Config)
Use this command in Global Config mode to enable MMRP. MMRP must also be enabled on
the individual interfaces.
the individual interfaces.
Note:
MMRP commands are supported on M6100 series switches only.
no mmrp (Global Config)
Use this command in Global Config mode to disable MMRP.
mmrp periodic state machine
Use this
command in Global Config mode to enable MMRP periodic state machine.
Format
show mrp interface {summary | unit/slot/port}
Mode
Privileged Exec
Default
disabled
Format
mmrp
Mode
Global Config
Format
no mmrp
Mode
Global Config
Default
disabled
Format
mmrp periodic state machine
Mode
Global Config