Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
473
M5300, M6100, and M7100 Series ProSAFE Managed Switches
MVRP Commands
mvrp (Global Config)
Use this command in Global Configuration mode to enable MVRP. MVRP must also be
enabled on the individual interfaces.
enabled on the individual interfaces.
Note:
If MVRP is enabled on all devices and STP is disabled, statically
created VLANs are propagated to other devices. Each device ends up
with all the VLANs and connecting ports participating in all the VLANs.
This may cause loops in the network.
created VLANs are propagated to other devices. Each device ends up
with all the VLANs and connecting ports participating in all the VLANs.
This may cause loops in the network.
Note:
MVRP commands are supported on M6100 series switches only.
no mvrp (Global Config)
Use this command in Global Configuration mode to disable MVRP.
mvrp periodic state machine
Use this command in Global Configuration mode to enable the MVRP periodic state
machine.
machine.
Default
enabled
Format
mvrp
Mode
Global Config
Format
no mvrp
Mode
Global Config
Default
disabled
Format
mvrp periodic state machine
Mode
Global Config