Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
495
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch) #show port-channel 3/1 counters
Local Interface................................ 3/1
Channel Name................................... ch1
Link State..................................... Down
Admin Mode..................................... Enabled
Port Channel Flap Count........................ 0
Mbr Mbr Flap
Ports Counters
------ ---------
0/1 0
0/2 0
0/3 1
0/4 0
0/5 0
0/6 0
0/7 0
0/8 0
clear port-channel counters
Use this command to clear and reset specified port-channel and member flap counters for
the specified interface.
the specified interface.
clear port-channel all counters
Use this command to clear and reset all port-channel and member flap counters for the
specified interface.
specified interface.
VPC Commands
VPC (also known as MLAG) enables a LAG to be created across two independent units, so
that some member ports of a VPC can reside on one unit and the other members of a VPC
can reside on another unit. The partner device on the remote side can be a VPC-unaware
unit. To the unaware unit, the VPC appears to be a single LAG connected to a single unit.
that some member ports of a VPC can reside on one unit and the other members of a VPC
can reside on another unit. The partner device on the remote side can be a VPC-unaware
unit. To the unaware unit, the VPC appears to be a single LAG connected to a single unit.
Format
clear port-channel {lag-intf-num | unit/slot/port} counters
Mode
Privileged EXEC
Format
clear port-channel all counters
Mode
Privileged EXEC