Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command displays the configured RSPAN VLAN. 

(NETGEAR Switch)# show vlan remote-span

Remote SPAN VLAN

------------------------------------------------------------------------

100

The commands in this section describe how to configure static MAC filtering. Static MAC 
filtering allows you to configure destination ports for a static multicast MAC filter irrespective 
of the platform. 

This command adds a static MAC filter entry for the MAC address macaddr on the VLAN 
vlanid

. A packet with a specific destination MAC address in a specific VLAN is admitted 

only if the ingress port is defined in the set of source ports, otherwise the packet is dropped.

Probe Port

Probe port (destination port) for the session identified with session-id. If probe port is not set then 
this field is blank.

Source Port

The port, which is configured as mirrored port (source port) for the session identified with

 

. 

If no source port is configured for the session then this field is blank.

Type

Direction in which source port configured for port mirroring.Types are tx for transmitted packets and 
rx for receiving packets.

Src VLAN

All member ports of this VLAN are mirrored. If the source VLAN is not configured, this field is blank.

Ref. Port

This port carries all the mirrored traffic at the source switch.

Src Remote VLAN

The source VLAN is configured at the destination switch. If the remote VLAN is not configured, this 
field is blank.

Dst Remote VLAN

The destination VLAN is configured at the source switch. If the remote VLAN is not configured, this 
field is blank.

IP ACL

The IP access-list id or name attached to the port mirroring session.

MAC ACL

The MAC access-list name attached to the port mirroring session.

Format

show vlan remote-span

Mode

Privileged Exec Mode