Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Only multicast address filters can have destination port lists.

This command displays the Static Filtering entries in the Multicast Forwarding Database 
(MFDB) table. 

You can enable the switch to operate as a DHCP Layer 2 relay agent to relay DHCP requests 
from clients to a Layer 3 relay agent or server. The Circuit ID and Remote ID can be added to 
DHCP requests relayed from clients to a DHCP server. This information is included in DHCP 
Option 82, as specified in sections 3.1 and 3.2 of RFC3046.

Format

show mac-address-table static {macaddr vlanid | all}

Mode

Privileged EXEC

MAC Address

The MAC Address of the static MAC filter entry.

VLAN ID

The VLAN ID of the static MAC filter entry.

Source Ports

The source port filter set slot and ports.

Format

show mac-address-table staticfiltering

Mode

Privileged EXEC

VLAN ID

The VLAN in which the MAC Address is learned.

MAC Address

A unicast MAC address for which the switch has forwarding and or filtering information. As the data 

is gleaned from the MFDB, the address will be a multicast address. The format is 6 two-digit 
hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB.

Type

The type of the entry. Static entries are those that are configured by the end user. Dynamic entries 
are added to the table as a result of a learning process or protocol.

Description

The text description of this multicast table entry. 

Interfaces

The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).