Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Fabric Events Out.............................. 0

Fabric Events Out discarded.................... 0

Scan Add Requests In........................... 0

Scan Del Requests In........................... 0

Scan Notify(Run Handlers) Out.................. 0

Scan Notify(Traverse Processing)............... 0

Use this command to display the route that a packet takes to reach its destination. This 
command lets you display the stack path to see if an error or packets loss occurs.

Use the following optional keywords to specify the command output:

. The output displays for a specific source unit in the stack. The value for 

 can be from 1 to 8.

. The output displays for all units in the stack.

. The output displays for a specific source unit in the stack. The 

value for destination-unit can be from 1 to 8.

Stack firmware synchronization (SFS) provides an automatic mechanism to synchronize the 
firmware on all stack members whose firmware version differs from the version running on 
the stack manager. This operation can result in either an upgrade or downgrade of firmware 
on the mismatched stack member. However, this operation does not attempt to synchronize 
the stack to the latest firmware in the stack. 

Use this command to enable stack firmware synchronization. 

Format

show stack-port stack-path [source-unit | all] [destination-unit]

Mode

Privileged EXEC

Default

Disabled

Format

boot auto-copy-sw

Mode

Privileged EXEC