Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Management Commands
71
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Config file 'startup-config' created successfully .
The configuration changes have been applied and saved.
Please enter 'show running-config' to see the final configuration.
Thanks for using EzConfig!
CPU Queue Commands
You can send all packets with a specified destination address to a higher priority queue (5)
than the default queue for data packets and unicast packets to the CPU.
than the default queue for data packets and unicast packets to the CPU.
ip cpu-priority
This command sends all packets with a specified destination IPv4 address to a higher priority
queue (5) than the default queue for data packets and unicast packets to the CPU.
queue (5) than the default queue for data packets and unicast packets to the CPU.
no ip cpu-priority
This command removes all packets with a specified destination IPv4 address from the higher
priority queue.
priority queue.
ipv6 cpu-priority
The command allows all packets with a specified destination IPv6 address into a higher
priority queue (5) than the default queue for data packets and unicast packets to the CPU.
priority queue (5) than the default queue for data packets and unicast packets to the CPU.
no ipv6 cpu-priority
This command removes all packets with a specified destination IPv6 address from the higher
priority queue.
priority queue.
Format
ip cpu-priority ip-address
Mode
Privileged EXEC
Format
no ip cpu-priority ip-address
Mode
Privileged EXEC
Format
ip cpu-priority ipv6-address
Mode
Privileged EXEC
Format
no ip cpu-priority ipv6-address
Mode
Privileged EXEC