Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This section describes the commands you use to view and configure Router Discovery 
Protocol settings on the switch. The Router Discovery Protocol enables a host to discover the 
IP address of routers on the subnet.

This command enables Router Discovery on an interface or range of interfaces. 

This command disables Router Discovery on an interface.

This command configures the address that the interface uses to send the router discovery 
advertisements. The valid values for ipaddr are 224.0.0.1, which is the all-hosts IP 
multicast address, and 255.255.255.255, which is the limited broadcast address.

list-name

(Optional) Name of the prefix list from which the hit count is to be cleared.

ipv6-prefix/prefix-length

(Optional) IPv6 prefix number and length (in bits) of the network mask. If this option is 
specified, hit counters are only cleared for the matching statement.

Default

disabled

Format

ip irdp 

Mode

Interface Config

Format

no ip irdp 

Mode

Interface Config

Default

224.0.0.1

Format

ip irdp address ipaddr

Mode

Interface Config