Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command enables the OSPF MTU mismatch detection.

Use this command to enable IP event dampening on a routing interface.

This command disables IP event dampening on a routing interface.

Format

no ip ospf mtu-ignore

Mode

Interface Config

Format

dampening [half-life period] [reuse-threshold suppress-threshold 

max-suppress-time [restart restart-penalty]]

Mode

Interface Config

Half-life period

The number of seconds it takes for the penalty to reduce by half. The configurable range is 1-30 
seconds. Default value is 5 seconds.

Reuse Threshold

The value of the penalty at which the dampened interface is restored. The configurable range is 
1-20,000. Default value is 1000.

Suppress 
Threshold

The value of the penalty at which the interface is dampened. The configurable range is 1-20,000. 
Default value is 2000.

Max Suppress 
Time

The maximum amount of time (in seconds) an interface can be in suppressed state after it stops 
flapping. The configurable range is 1-255 seconds. The default value is four times of half-life period. 
If half-period value is allowed to default, the maximum suppress time defaults to 20 seconds.

Restart Penalty

Penalty applied to the interface after the device reloads. The configurable range is 1-20,000. Default 
value is 2000.

Format

no dampening

Mode

Interface Config