Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Border Gateway Protocol Commands
839
M5300, M6100, and M7100 Series ProSAFE Managed Switches
BGP Commands
router bgp
This command enables BGP and identifies the autonomous system (AS) number of the
router. Only a single instance of BGP can be run and the router can only belong to a single
router. Only a single instance of BGP can be run and the router can only belong to a single
AS.
no router bgp
If you enter the no router bgp command, BGP is disabled and all BGP configuration
reverts to default values. Alternatively, you can use
reverts to default values. Alternatively, you can use
855 in BGP
Router Configuration mode to disable BGP globally without clearing the BGP configuration.
address-family ipv6
To enter IPv6 Address Family Configuration mode in order to specify IPv6-specific
configuration parameters, use the address-family ipv6 command in BGP Router
Configuration mode. Commands entered in this mode can be used to enable exchange of
IPv6 routes, specify IPv6 prefixes to be originated, and configure inbound and outbound
policies to be applied to IPv6 routes.
configuration parameters, use the address-family ipv6 command in BGP Router
Configuration mode. Commands entered in this mode can be used to enable exchange of
IPv6 routes, specify IPv6 prefixes to be originated, and configure inbound and outbound
policies to be applied to IPv6 routes.
Default
BGP is inactive by default.
Format
router bgp as-number
Mode
Global Config
Parameter
Description
as-number
The router’s autonomous system number (ASN).
Default
BGP is inactive by default.
Format
no router bgp as-number
Mode
Global Config
Default
Exchange of IPv6 routes is disabled by default.
Format
address-family ipv6
Mode
BGP Router Config