Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command displays a summary of BGP IPv6 configuration and status. The output and 
field descriptions are the same as for the command 

904, 

except that Number of Network Entries, Number of AS Paths, and Pfx Rcvd all count IPv6 
rather than IPv4 routing information. The command lists all adjacencies that are configured to 
carry IPv6 routes.

This command reports the status of IPv6 outbound update groups and their numbers. Output 
and format are the same as for 

906.

Exterior routing protocols like BGP use industry-standard routing policy to filter and modify 
routing information exchanged with peers. BGP makes use of the following routing policy 
constructs:

AS Path Access Lists

BGP Community Lists

Use the Routing Policy commands to configure routing policies such as:

Matching on an AS Path

Modifying the AS Path

Setting the local preference

Setting the route metric

Setting an IPv6 next hop

Setting or matching on a BGP community

Format

show bgp ipv6 summary

Mode

Privileged Exec

Format

show bgp ipv6 update-group [group-index | peer-address] 

Mode

Privileged Exec

group-index

(Optional) If specified, this option restricts the output to a single update group. 

peer-address

(Optional) If specified, this option restricts the output to the update group containing the peer with the 
given address.