Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
RIP
122
Managed Switches
Enable Routing for the Switch
The example is shown as CLI commands and as a web interface procedure.
CLI: Enable Routing for the Switch
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit
Web Interface: Enable Routing for the Switch
1.
Select Routing > IP > Basic > IP Configuration.
A screen similar to the following displays.
2.
For Routing Mode, select the Enable radio button.
3.
Click Apply to save the settings.