Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Netgear
  4. M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch
  5. Ratgeber Für Administratoren

Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Download
Seite von 721
OSPF 
152
Managed Switches 
CLI: Configure Area 1 as a Stub Area on A2
1. 
Enable routing on the switch.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#router ospf
2. 
Set the router ID to 2.2.2.2.
(Netgear Switch) (Config-router)#router-id 2.2.2.2
3. 
Configure area 0.0.0.1 as a stub area.
(Netgear Switch) (Config-router)#area 0.0.0.1 stub 
4. 
Enable OSPF area 0.0.0.1 on the 1/0/15.
(Netgear Switch) (Config-router)#exit
(Netgear Switch) (Config-router)#exit
(Netgear Switch) (Config)#interface 1/0/15
(Netgear Switch) (Interface 1/0/15)#routing
(Netgear Switch) (Interface 1/0/15)#ip address 192.168.20.2  255.255.255.0
(Netgear Switch) (Interface 1/0/15)#ip ospf
(Netgear Switch) (Interface 1/0/15)#ip ospf areaid 0.0.0.1
(Netgear Switch) (Interface 1/0/15)#exit
(Netgear Switch) (Config)#exit
(Netgear Switch) #show ip route
Total Number of Routes......................... 2
   Network          Subnet                    Next Hop     Next Hop
   Address           Mask         Protocol     Intf       IP Address
--------------- --------------- ------------  ---------  --------------- 
0.0.0.0         0.0.0.0         OSPF Inter    1/0/15     192.168.20.1    
192.168.20.0    255.255.255.0   Local         1/0/15     192.168.20.2