Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
BGP
189
Managed Switches
4.
Create a BGP neighbor with loopback interface on Switch E,
(Netgear Switch) (Config) #router bgp 200
(Netgear Switch) (Config-router) # bgp router-id 10.1.2.1
(Netgear Switch) (Config-router) # neighbor 10.1.1.1 remote-as 200
(Netgear Switch) (Config-router) #neighbor 10.1.1.1 update-source loopback 0
Check the iBGP Status
Check the iBGP status on Switch D and on Switch E with the same command.
(Netgear Switch) #show ip bgp summary
IPv4 Routing .................................. Enable
BGP Admin Mode ................................ Enable
BGP Router ID ................................. 10.1.1.1
Local AS Number ............................... 200
Number of Network Entries ..................... 1
Number of AS Paths ............................ 0
Neighbor ASN MsgRcvd MsgSent State Up/Down Time Pfx Rcvd
---------------- ----- -------- -------- ------------- -------------- ---------
10.1.2.1 200 11 13 ESTABLISHED 0:00:04:20 0
172.126.1.1 100 75 164 ESTABLISHED 0:00:35:40 0