Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
SNTP
431
Managed Switches
show sntp server
(Netgear Switch) #show sntp server
Server IP Address:
81.169.155.234
Server Type:
ipv4
Server Stratum:
3
Server Reference Id:
NTP Srv: 212.186.110.32
Server Mode:
Server
Server Maximum Entries: 3
Server Current Entries: 1
SNTP Servers
------------
IP Address:
81.169.155.234
Address Type:
IPV4
Priority:
1
Version:
4
Port:
123
Last Update Time:
MAY 18 04:59:13 2005
Last Attempt Time:
MAY 18 11:59:33 2005
Last Update Status:
Other
Total Unicast Requests:
1111
Failed Unicast Requests: 361
Configure SNTP
The example is shown as CLI commands and as a web interface procedure.
CLI: Configure SNTP
NETGEAR switches do not have a built-in real-time clock. However, it is possible to use
SNTP to get the time from a public SNTP/NTP server over the Internet. You may need
permission from those public time servers. The following steps configure SNTP on the
switch:
SNTP to get the time from a public SNTP/NTP server over the Internet. You may need
permission from those public time servers. The following steps configure SNTP on the
switch:
1.
Configure the SNTP server IP address.
The IP address can be either from the public NTP server or your own. You can search the
Internet to locate the public server. The servers available could be listed in domain-name
format instead of address format. In that case, use the ping command on the PC to find
the server’s IP address. The following example configures the SNTP server IP address to
208.14.208.19.
Internet to locate the public server. The servers available could be listed in domain-name
format instead of address format. In that case, use the ping command on the PC to find
the server’s IP address. The following example configures the SNTP server IP address to
208.14.208.19.