Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Tools
445
Managed Switches
Web Interface: Specify the Source (Mirrored) Ports and
Destination (Probe)
Destination (Probe)
1.
Select Monitoring > Mirroring > Port Mirroring.
A screen similar to the following displays.
2.
Scroll down and select the Source Port 1/0/2 check box. The value 1/0/2 now appears in the
Interface field at the top.
Interface field at the top.
3.
Enter the following information:
•
In the Destination Port field, enter 1/0/3.
•
In the Session Mode field, select Enable.
4.
Click Apply.
Remote SPAN
Mirroring lets you monitor traffic to and from a port by copying the traffic to a probe port for
analysis. Mirroring is usually limited to on one switch. With a remote switched port analyzer
(RSPAN), you can extend mirroring to all participating switches.
analysis. Mirroring is usually limited to on one switch. With a remote switched port analyzer
(RSPAN), you can extend mirroring to all participating switches.
RSPAN VLAN
Source port
Destination port
1/0/1
Switch 1
Reflected
port
port
1/0/
Switch 2
Switch 3
Switch 4
1/0/23
1/0/24
1/0/23
1/0/24
1/0/3
1/0/4
Figure 45. Example of an RSPAN topology
In the previous figure, Switch 1 is the source switch, Switch 2 and Switch 3 are intermediate
switches, and Switch 4 is the destination switch.
switches, and Switch 4 is the destination switch.