Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

The example is shown as CLI commands and as web interface procedure. 

Use the following commands to enable iSCSI awareness, select DSCP, and set DSCP queue 
number and aging time.

(Netgear Switch) #config

(Netgear Switch) (Config) #iscsi enable

(Netgear Switch) (Config) #iscsi cos dscp 46

(Netgear Switch) (Config) #iscsi aging time 10

(Netgear Switch) (Config) #exit

Enable iSCSI awareness, select DSCP, and set the DSCP queue number and aging 
time.

a. Select Switching > iSCSI > Basic. 

A screen similar to the following displays.

b.  Enter the following information:

Next to iSCSI Status, select the Enable radio button.

Next to QoS Profile, select the DSCP radio button.

From the DSCP menu, select 46 (the default value).

Next to Remark, select the Enable radio button (the default value).

In the iSCSI Aging Time field, enter 10 (the default value).

Click Apply to save the settings.