Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
116
M6100, M5300, and M7100 Series Managed Switches
Congure PoE Settings
To configure PoE settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > PoE > Advanced > PoE Configuration.
The Unit Selection field displays the current PoE unit.
8.
To change the PoE unit, select another unit from the list.
9.
To set the System Usage Threshold, enter a number from 1 to 99.
Total Power (Main AC)
The total power provided by the MAIN AC power source.
Total Power (RPS)
The total power provided by the redundant power source.
Power Source
Current source of system power (Main AC or RPS).
Threshold Power
System can power up one port, if consumed power is less than this
power. Consumed power can be between Nominal & Threshold Power
values. The threshold power value is effected by changing System
Usage Threshold.
power. Consumed power can be between Nominal & Threshold Power
values. The threshold power value is effected by changing System
Usage Threshold.
Consumed Power
Total amount of a power which is currently being delivered to all ports.
Table 40. PoE Configuration nonconfigurable Fields (continued)
Field
Description