Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
122
M6100, M5300, and M7100 Series Managed Switches
This specifies the access level for this community.
12.
Use Status to specify the status of this community by selecting Enable or Disable.
If you select enable, the Community Name must be unique among all valid Community
Names or the set request are rejected. If you select disable, the Community Name
becomes invalid.
Names or the set request are rejected. If you select disable, the Community Name
becomes invalid.
13.
Click the Add button.
This adds the selected community to the switch.
14.
To delete the selected Community Name, click the Delete button.
Configure SNMP V1/V2 Trap Settings
To configure the SNMP V1/V2 trap settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > SNMP > SNMP V1/V2 > Trap Configuration.
8.
In the Source Interface list, select the source interface to use for SNMP Trap receiver.