Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
125
M6100, M5300, and M7100 Series Managed Switches
This enables or disables activation of multiple user traps.The factory default is Enable.
This trap is triggered when the same user ID is logged into the switch more than once at
the same time (either through Telnet or the serial port).
This trap is triggered when the same user ID is logged into the switch more than once at
the same time (either through Telnet or the serial port).
11.
Select the Spanning Tree Disable or Enable radio button.
This enables or disables activation of spanning tree traps. The factory default is Enable.
12.
Select the ACL Disable or Enable radio button.
This enables or disables activation of ACL traps. The factory default is Disable.
13.
Select the PoE Disable or Enable radio button.
This enables or disables activation of PoE traps. The factory default is Enable. Indicates
whether PoE traps are sent.
whether PoE traps are sent.
14.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
View the Supported MIBs
To view all the MIBs supported by the switch:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > SNMP > SNMP V1/V2 >Supported MIBs.