Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Select the Admin mode Disable or Enable radio button.

This specifies whether the ISDP Service is enabled or disabled. The default value is 
Enabled.

Use Timer to specify the period of time between sending new ISDP packets. 

The range is 5 to 254 seconds. The default value is 30 seconds.

Use Hold Time to specify the hold time for ISDP packets that the switch transmits. 

The hold time specifies how long a receiving device must store information sent in the 
ISDP packet before discarding it. The range 10 to 255 seconds. The default value is 180 
seconds.

Select the Version 2 Advertisements Disable or Enable radio button.

This enables or disables the sending of ISDP version 2 packets from the device. The 
default value is Enabled.

The following table describes the ISDP Basic Global Configuration fields.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

Neighbors table last time changed Specifies if

Device ID

The device ID of this switch.

Device ID Format Capability

The device ID format capability.

Device ID Format

The device ID format.