Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Time Since Last Restart

Time since the current management card because the active 
management card. For the backup manager, the value is set to 
0d:00:00:00.

Restart In Progress

Indicates whether a restart is in progress. A restart is not 
considered complete until all hardware tables are fully reconciled.

Warm Restart Ready

Indicates whether the initial full checkpoint finished.

Status

Status of copying the running configuration to backup blades.

Backup Configuration Age

Indicates the time since the running configuration was last copied 
to the backup blade.

Time Until Next Backup

Indicates the number of seconds until the running configuration is 
copied to the backup blade.

NSF Support on Unit

Unit ID

The slot number for the blade.

NSF Support

Displays whether the switch supports the nonstop forwarding 
(NSF) feature.