Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

 - If you select this button and confirm your selection on the next 

screen, all VLAN configuration parameters are reset to their factory default values. 

Also, all VLANs, except for the default VLAN, are deleted. The factory default values are 

as follows:

All ports are assigned to the default VLAN of 1.

All ports are configured with a PVID of 1.

All ports are configured to an Acceptable Frame Types value of Admit All Frames.

All ports are configured with ingress filtering disabled.

All ports are configured to transmit only untagged frames.

GVRP is disabled on all ports and all dynamic entries are cleared.

The Internal VLAN section displays the allocation base and the allocation mode of internal 
VLAN. The internal VLAN is reserved by a port-based routing interface and invisible to the 
end user. Once these internal VLANs are allocated by the port-based routing interface, they 
cannot be assigned to a routing VLAN interface.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100.