Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The following table describes the nonconfigurable information displayed on the screen.

You can assign a port VLAN ID (PVID) to an interface. There are certain requirements for a 
PVID:

You must define a PVID for all ports.

If no other value is specified, the default VLAN PVID is used.

To change the port’s default PVID, you must first create a VLAN that includes the port as 
a member.

Use the Port VLAN ID (PVID) Configuration screen to configure a virtual LAN on a port.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

VLAN ID

The VLAN identifier (VID) of the VLAN. The range of the VLAN ID is 1 
to 4093.

VLAN Name

The name of the VLAN. VLAN ID 1 is always named `Default`.

VLAN Type

The VLAN type:

 (VLAN ID = 1). Always present

. A VLAN that you configured

. A VLAN created by GVRP registration that you did not 

convert to static, and that GVRP can therefore remove

Routing Interface

The interface associated with the VLAN, in the case that VLAN routing 
is configured for this VLAN.

Member Ports

The ports that are included in the VLAN.