Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
210
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable information displayed on the screen.
Configure an IP Subnet-Based VLAN
IP subnet to VLAN mapping is defined by configuring an entry in the IP Subnet to VLAN table.
An entry is specified through a source IP address, network mask, and the desired VLAN ID.
The IP subnet to VLAN configurations are shared across all ports of the device.
To configure IP subnet-based VLAN:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> VLAN > Advanced > IP Subnet Based VLAN.
8.
In the IP Address field, specify a valid IP address bound to the VLAN ID.
Enter the IP address in dotted-decimal notation.
9.
In the Subnet Mask field, specify a valid subnet mask of the IP address.
Table 80. Protocol-Based VLAN Group Membership
Field
Description
Group Name
This field identifies the name for the protocol-based VLAN that you
selected. It can be up to 32 alphanumeric characters long, including
blanks.
selected. It can be up to 32 alphanumeric characters long, including
blanks.
Current Members
This button can be click to show the current numbers in the selected
protocol-based VLAN group.
protocol-based VLAN group.