Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
219
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7.
Select Switching > Auto-VoIP > OUI-based > Port Settings.
The Operational Status field displays the current operational status of each interface.
8.
Use Interface check boxes to select the interfaces.
9.
In the Auto VoIP Mode field, select Disable or Enable.
Auto-VoIP is disabled by default.
10.
Use Go To Interface to select an interface by entering its number.
11.
Click the Apply button.
The switch is updated with the values you entered. For the switch to retain the new
values across a power cycle, you must perform a save.
values across a power cycle, you must perform a save.
Configure the OUI Table
To configure the OUI Table:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.