Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
242
M6100, M5300, and M7100 Series Managed Switches
For each configured instance, the information described in the following table displays on the
screen.
screen.
View the Spanning Tree MST Port Status
You can configure and display Multiple Spanning Tree (MST) settings on a specific port on
the switch.
the switch.
A port can become Diagnostically Disabled (D-Disable) when DOT1S experiences a severe
error condition. The most common cause is when the DOT1S software experiences BPDU
flooding. The flooding criteria is such that DOT1S receives more than 15 BPDUs in a
3-second interval. The other causes for DOT1S D-Disable are extremely rare.
flooding. The flooding criteria is such that DOT1S receives more than 15 BPDUs in a
3-second interval. The other causes for DOT1S D-Disable are extremely rare.
To view the Spanning Tree MST port status:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
Table 90. MST Configuration
Field
Description
Bridge Identifier
The bridge identifier for the selected MST instance. It is made up using
the bridge priority and the base MAC address of the bridge.
the bridge priority and the base MAC address of the bridge.
Time Since Topology Change
The time n seconds since the topology of the selected MST instance
last changed.
last changed.
Topology Change Count
Number of times topology changed for the selected MST instance.
Topology Change
The value of the topology change parameter for the switch indicating if
a topology change is in progress on any port assigned to the selected
MST instance. It takes a value if True or False.
a topology change is in progress on any port assigned to the selected
MST instance. It takes a value if True or False.
Designated Root
The bridge identifier of the root bridge. It is made up from the bridge
priority and the base MAC address of the bridge
priority and the base MAC address of the bridge
Root Path Cost
Path Cost to the Designated Root for this MST instance.
Root PortIdentifier
Port to access the Designated Root for this MST instance.