Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
254
M6100, M5300, and M7100 Series Managed Switches
Configure IGMP Snooping
You can configure the parameters for IGMP snooping, which is used to build forwarding lists
for multicast traffic.
for multicast traffic.
Note:
You must log in as the admin user, which has read/write access
privileges to change the data on this screen.
privileges to change the data on this screen.
To configure IGMP snooping:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > IGMP Snooping > Configuration.
8.
Select the Admin mode Enable or Disable radio button
This specifies the administrative mode for IGMP snooping for the switch. The default is
Disable.
Disable.