Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The settings are applied to the switch. Configuration changes take effect immediately.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Switching

> Multicast > IGMP Snooping > IGMP VLAN Configuration.

To enable IGMP snooping on a VLAN, enter the VLAN ID and configure the IGMP snooping 

values:

Use Admin Mode to enable or disable IGMP snooping for the specified VLAN ID.

Use Fast Leave Admin Mode to enable or disable the IGMP snooping fast leave 
mode for the specified VLAN ID.

Use Group Membership Interval to set the value for group membership interval of 
IGMP snooping for the specified VLAN ID. The valid range is Maximum Response 
Time + 1 to 3600 seconds.

Use Maximum Response Time to set the value for maximum response time of IGMP 
snooping for the specified VLAN ID. The valid range is 1 to Group Membership 
Interval - 1. Its value must be greater than group membership interval value.

Use Multicast Router Expiry Time to set the value for multicast router expiry time of 
IGMP snooping for the specified VLAN ID. The valid range is 0 to 3600 seconds.