Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

All physical, VLAN, and LAG interfaces are displayed.

Use the Interface check boxes to select the interface.

Use Admin Mode to select the interface mode for the selected interface for MLD snooping 

for the switch. 

The default is Disable.

Use Group Membership Interval(secs) to specify the amount of time the switch waits for a 

report for a particular group on a particular interface before it deletes that interface from the 

group. 

The valid range is from 2 to 3600 seconds. The configured value must be greater than 
Max Response Time. The default is 260 seconds.

Use Max Response Time (secs) to specify the amount of time the switch waits after 

sending a query on an interface because it did not receive a report for a particular group on 

that interface. 

Enter a value greater or equal to 1 and less than the group membership interval in 
seconds. The default is 10 seconds. The configured value must be less than the group 
membership interval.

Use Present Expiration Time to specify the amount of time the switch waits to receive a 

query on an interface before removing it from the list of interfaces with multicast routers 

attached. 

Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of zero 
indicates an infinite time-out, that is, no expiration.

Use Fast Leave Admin Mode to select the fast leave mode for a particular interface. The 

default is Disable.

Select the Proxy Querier Mode to Enable or Disable MLD proxy querier on the system.

If it is disabled, then an MLD proxy query with source IP 0::0 is not sent in response to an 
MLD leave packet. If it is enabled, then MLD proxy queries are sent. The default value is 
Enable.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.