Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Use the MVR Multicast VLAN to specify the VLAN on which MVR multicast data is 

received. 

All source ports belong to this VLAN. The value can be set in a range of 1 to 4094. The 

default value is 1.

Use the MVR Global query response time to set the maximum time to wait for the IGMP 

reports membership on a receiver port. This time applies only to receiver-port leave 

processing. When an IGMP query is sent from a receiver port, the switch waits for the 

default or configured MVR query time for an IGMP group membership report before 

removing the port from the multicast group membership. The value is equal to the tenths of 

second. The range is from 1 to 100 tenths. The factory default is 5 tenths or one-half.

Select a MVR Mode radio button to specify the MVR mode of operation. 

The factory default is compatible.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

To refresh the screen with the latest information on the switch, click the Update button.

The following table describes the nonconfigurable information displayed on the screen.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

MVR Max Multicast Groups 

The maximum number of multicast groups that MVR supports.

MVR Current Multicast Groups 

Displays the current number of MVR groups allocated.