Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
281
M6100, M5300, and M7100 Series Managed Switches
displayed as the first entry followed by the remaining (greater) MAC addresses. An
exact match is required.
exact match is required.
•
Searched by VLAN ID
. Select VLAN ID, enter the VLAN ID, for example, 100. Then
click the Go button. If the address exists, the entry is displayed as the first entry
followed by the remaining (greater) MAC addresses.
followed by the remaining (greater) MAC addresses.
•
Searched by Port
. Select Port, enter the port ID in Unit/Slot/Port format, for example,
2/1/1. Then click the Go button. If the address exists, the entry is displayed as the first
entry followed by the remaining (greater) MAC addresses.
entry followed by the remaining (greater) MAC addresses.
The following table describes the nonconfigurable information displayed on the screen.
Set the Dynamic Address Aging Interval
You can set the address aging interval for the specified forwarding database.
To set the address aging interval,
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
Table 106. Basic Address Table
Field
Description
Total MAC Address
Displaying the number of total MAC addresses learned or configured.
MAC Address
A unicast MAC address for which the switch has forwarding and/or
filtering information. The format is a 6 byte MAC address that is
separated by colons, for example 01:23:45:67:89:AB.
separated by colons, for example 01:23:45:67:89:AB.
VLAN ID
The VLAN ID associated with the MAC address.
Port
The port upon which this address was learned.
Status
The status of this entry. The meanings of the values are as follows:
•
Static. The value of the corresponding instance was added by the
system or a user and cannot be relearned.
system or a user and cannot be relearned.
•
Learned. The value of the corresponding instance was learned,
and is being used.
and is being used.
•
Management. The value of the corresponding instance is also the
value of an existing instance of dot1dStaticAddress.
value of an existing instance of dot1dStaticAddress.