Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
313
M6100, M5300, and M7100 Series Managed Switches
When enabled, the state machine can help limit the effect of topology changes and
reduce the number of protocol data units (PDUs) transmitted between devices. The
default is Disable.
reduce the number of protocol data units (PDUs) transmitted between devices. The
default is Disable.
11.
Select the Periodic State Machine (MMRP) Enable or Disable radio button.
When enabled, the state machine can help limit the effect of topology changes and
reduce the number of protocol data units (PDUs) transmitted between devices. The
default is Disable.
reduce the number of protocol data units (PDUs) transmitted between devices. The
default is Disable.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen with the latest information on the switch, click the Update button.
Configure MRP Port Settings
You can configure the per-port MRP mode and timer settings. The timers control when and
how often various messages are transmitted on each interface.
how often various messages are transmitted on each interface.
To configure MRP port settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> MRP > Advanced > Port Settings.