Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

You can configure routing parameters for the switch as opposed to an interface. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

IcmpOutErrors

The number of ICMP messages that this entity did not send due to 
problems discovered within ICMP such as a lack of buffers. This value 
does not include errors discovered outside the ICMP layer such as the 
inability of IP to route the resultant datagram. In some implementations 
there might be no types of error that contribute to this counter's value.

IcmpOutDestUnreachs

The number of ICMP destination unreachable messages sent.

IcmpOutTimeExcds

The number of ICMP time exceeded messages sent.

IcmpOutParmProbs

The number of ICMP parameter problem messages sent.

IcmpOutSrcQuenchs

 The number of ICMP source quench messages sent.

IcmpOutRedirects

The number of ICMP redirect messages sent. For a host, this is always 
zero, since hosts do not send redirects.

IcmpOutEchos

The number of ICMP echo (request) messages sent.

IcmpOutEchoReps

The number of ICMP echo reply messages sent.

IcmpOutTimestamps

The number of ICMP timestamp (request) messages.

IcmpOutTimestampReps

The number of ICMP timestamp reply messages sent.

IcmpOutAddrMasks

The number of ICMP address mask request messages sent.