Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

In the Adv Other Config Flag list, select Enable or Disable to specify the router 

advertisement other stateful configuration flag. 

Default value of other config flag is Disable.

In the Adv Suppress Flag list, select to Enable or Disable router advertisement 

suppression on an interface. 

The default value of the suppress flag is Disable. 

In the Destination Unreachables list, select to Enable or Disable the mode of sending 

ICMPv6 destination unreachables on this interface.

If disabled, then this interface does not send ICMPv6 eestination unreachables. By 
default, the IPv6 destination unreachables mode is enabled. 

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the nonconfigurable data that is displayed. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Operational Mode

Specifies the operational state of an interface. The default value is 
Disable.

Link State

Indicates whether the link is up or down.