Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Routing
372
M6100, M5300, and M7100 Series Managed Switches
•
Encrypt
. If you select Encrypt, you are prompted to enter both an authentication key
and an authentication ID. Encryption uses the MD5 Message-Digest algorithm. All
routers on the network must be configured with the same key and ID.
routers on the network must be configured with the same key and ID.
14.
Enter the RIP Authentication Key for the specified interface.
If you selected Authentication Type None, you are not prompted to enter a key. If you
selected Simple or Encrypt, the key can be up to 16 octets long. The key value is
displayed only if you are logged on with read/write privileges.
selected Simple or Encrypt, the key can be up to 16 octets long. The key value is
displayed only if you are logged on with read/write privileges.
15.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen with the latest information on the switch, click the Update button.
The following table describes the nonconfigurable data that is displayed.
Route Redistribution
Use this screen to configure the RIP route redistribution parameters. The allowable values for
each field are displayed next to the field. If any invalid values are entered, an alert message
is displayed with the list of all the valid values.
each field are displayed next to the field. If any invalid values are entered, an alert message
is displayed with the list of all the valid values.
To configure advanced RIP route redistribution settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
Table 139. RIP Advanced Interface Configuration
Field
Description
Bad Packets Received
The number of RIP response packets received by the RIP process that
were subsequently discarded for any reason.
were subsequently discarded for any reason.
Bad Routes Received
The number of routes in valid RIP packets that were ignored for any
reason (for example, unknown address family, or invalid metric).
reason (for example, unknown address family, or invalid metric).
Updates Sent
The number of triggered RIP updates actually sent on this interface.
This explicitly does not include full updates sent containing new
information.
This explicitly does not include full updates sent containing new
information.
IP Address
The IP address of the router interface.
Link State
Indicates whether the RIP interface is up or down.