Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
OSPF and OSPFv3
397
M6100, M5300, and M7100 Series Managed Switches
Configure the OSPF NSSA Area
To configure the NSSA area:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > OSPF > Advanced > NSSA Area Configuration.
Area LSA Checksum
The 32-bit unsigned sum of the link state advertisements' LSA
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
Type of Service
This field is the normal ToS associated with the stub metric.
Table 147. OSPF Stub Area Configuration (continued)
Field
Description