Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
OSPF and OSPFv3
400
M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > OSPF > Advanced > Area Range Configuration.
8.
Enter the OSPF Area ID.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
9.
Enter the IP Address for the address range for the selected area.
10.
Enter the Subnet Mask for the address range for the selected area.
11.
From the list in the LSDB Type field, select the type of link advertisement associated with
the specified area and address range.
Options are as follows: Network Summary or NSSA External. The default type is
Network Summary.
Network Summary.
12.
In the Advertise list, select Enable or Disabl.
If you select Enable, the address range is advertised outside the area through a network
summary LSA. The default is Enable.
summary LSA. The default is Enable.
13.
Click the Add button.
The new address range is added.
14.
To remove the specified address range from the area configuration, click the Delete button.
15.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure the OSPF Interface
To configure the OSPF interface:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.