Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Routing > OSPF > Advanced > Virtual Link Configuration. 

LSA Type

The format and function of the link state advertisement. LSA Type is 
one of the following:

Area Opaque

AS Opaque

Link Opaque

LS ID

The link state ID identifies the piece of the routing domain that is being 
described by the advertisement. The value of the LS ID depends on the 
advertisement's LS type.

Age

The time since the link state advertisement was first originated, in 
seconds.

Sequence 

The sequence number field is a signed 32-bit integer. It is used to 
detect old and duplicate link state advertisements. The larger the 
sequence number, the more recent the advertisement.

Checksum

The checksum is used to detect data corruption of an advertisement. 
This corruption can occur while an advertisement is being flooded, or 
while it is being held in a router's memory. This field is the checksum of 
the complete contents of the advertisement, except the LS age field.