Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
OSPF and OSPFv3
418
M6100, M5300, and M7100 Series Managed Switches
Configure the OSPF Route Redistribution
You can configure the OSPF Route Redistribution parameters. The allowable values for each
field are displayed next to the field. If any invalid values are entered, an alert message is
displayed with the list of all the valid values.
field are displayed next to the field. If any invalid values are entered, an alert message is
displayed with the list of all the valid values.
Configure the OSPF route redistribution:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > OSPF > Advanced > Route Redistribution.
State (continued)
•
Other Designated Router
. The interface is connected to a
broadcast or NBMA network on which other routers were selected
to be the designated router and backup designated router either.
The router attempts to form adjacencies to both the designated
router and the backup designated router.
to be the designated router and backup designated router either.
The router attempts to form adjacencies to both the designated
router and the backup designated router.
Metric
The metric value used by the Virtual Link.
Table 155. OSPF Virtual Link Configuration (continued)
Field
Description