Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
OSPF and OSPFv3
427
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
Configure the OSPFv3 Common Area
To configure the OSPFv3 common area settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
Table 157. Advanced OSPFv3 Configuration
Field
Description
ASBR Mode
Reflects whether the ASBR mode is enabled or disabled. Enable implies
that the router is an autonomous system border router. Router
automatically becomes an ASBR when it is configured to redistribute
routes learned from other protocol.
that the router is an autonomous system border router. Router
automatically becomes an ASBR when it is configured to redistribute
routes learned from other protocol.
ABR Status
The values of this are Enabled or Disabled. Enabled implies that the
router is an area border router. Disabled implies that it is not an area
border router.
router is an area border router. Disabled implies that it is not an area
border router.
External LSA Count
The number of external (LS type 5) link state advertisements (LSAs) in
the link state database.
the link state database.
External LSA Checksum
The sum of the LS checksums of the external LSAs contained in the link
state database. This sum can be used to determine if there was a
change in a router's link state database, and to compare the link state
databases of two routers.
state database. This sum can be used to determine if there was a
change in a router's link state database, and to compare the link state
databases of two routers.
New LSAs Originated
In any given OSPFv3 area, a router originates several LSAs. Each router
originates a router-LSA. If the router is also the designated router for any
of the area's networks, it originates network-LSAs for those networks.
This value represents the number of LSAs originated by this router.
originates a router-LSA. If the router is also the designated router for any
of the area's networks, it originates network-LSAs for those networks.
This value represents the number of LSAs originated by this router.
LSAs Received
The number of LSAs received that were determined to be new
instantiations. This number does not include newer instantiations of
self-originated LSAs.
instantiations. This number does not include newer instantiations of
self-originated LSAs.