Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The following table describes the nonconfigurable data that is displayed.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Routing > OSPFv3 > Advanced > NSSA Area Configuration. 

SPF Runs

The number of times that the intra-area route table was calculated using 
this area's link state database. This is done using Dijkstra's algorithm.

Area Border Router Count

The total number of area border routers reachable within this area. This 
is initially zero, and is calculated in each SPF Pass. 

Area LSA Count

The total number of link state advertisements in this area's link state 
database, excluding AS External LSAs.

Area LSA Checksum 

The 32-bit unsigned sum of the link state advertisements' LSA 
checksums contained in this area's link state database. This sum 
excludes external (LSA type 5) link state advertisements. The sum can 
be used to determine if there was a change in a router's link state 
database, and to compare the link state database of two routers.

Type of Service

This field is the normal ToS associated with the stub metric.